Tools To Design Jeans Studs

Removing jeans buttons which are sewn-on are comparatively manageable than taking off metal rivet-style buttons.

These latter types of buttons are designed that way to bear pressure and still be secure.

Stay with us to know how you can remove the button without breaking it.

How To Remove Jeans Button Without Breaking It?

For typical clothing pieces, removing the button seems seamless. But when it comes to removing the button or rivets from your denim pants, you're left with a whole lot of questions!

The fact is that denim pants don't feature a sewn-on button is enough to complicate your task! And the two-part stud button installed in jeans makes the job a lot more complex than you ever thought so!

For this method, you'd not require a pair of scissors to clip your button! Instead, you'd need to use a lot of tools to get your job done. But be very careful with the tools and techniques.

In general, removing the jeans button without breaking it can be accomplished by two simple methods. One is by prying the button apart with the help of pliers, while another method is by cutting it entirely. You can also perform the job by using a screwdriver too!

Here, you will get a detailed explanation of both methods elaborately. But before explaining the steps, there's an important thing to note.

Are you sure that you want to remove your two-part button from your jeans? Then, let's explore the anatomy of these buttons in the first go!

Understanding Two-Part Stud Button, In a Nutshell

You can spot stud buttons on denim pieces of outfits, including jackets and pants. As working with stud buttons becomes really difficult, you'd require to have an in-depth understanding of its anatomy.

They get securely fastened to materials. Instead of thin layers of threads that connect the fabric's button, these buttons rely on metal rivets. These rivets are attached to the fabric securely.

And removing these buttons from the jeans is always possible. But to ensure that the task gets accomplished without any breakage, you need to avoid ripping and snagging the material's fibers.

Two-part stud buttons comprise two parts –the button on its front and a stud on the jean's underside. When they get installed in the denim, the parts are attached together by punching. On designing fronts, they are permanent. That's the predominant reason why these buttons are so difficult to remove.

The attachment leaves a wide hole in your jeans' fabric once the button gets detached from it. You may remove the button attached with threads, but this will only leave just a bit of trace.

However, people prefer a more reliable method to prevent visible holes once the task gets completed. And to prevent such issues, you can refer to the below-offered procedure. But before you begin, here are tools that you require:

Tools to Use:

You may require these tools with regard to the method you choose:

Pliers
Screwdriver
Wire Cutters; and
Face protection tools

Method 1: How to Remove Jeans Button With Two Pliers

In this method, you would require two pliers and a pair of jeans to remove its button. To follow the steps, read on the below-offered section.

Step 1: Choose Your Jeans

First off, choose the jeans required for removing the button. As your jeans have the two-part stud button, carefully place them on a flat surface.

As soon as you position your jeans on a flat surface, ensure that you do not hurry with the step. Lastly, check that the rivet does not get broken.

Step 2: Use Two Pliers

In this step, you would require two pliers to grip the sides tightly. Firstly, use one plier to grip the front side of the button. On the other hand, your second piece of plier should get used for gripping the other side of your jean's underside!

You'll have to be cautious about how you hold the pliers. Ensure that you have your face protection tool worn already! Ensure that you put some force while gripping the sides.

Step 3: Twist The Button

As you have finally gripped the sides with the help of the pliers, it's time to twist the button. All you need to do is screw the button together if you see the button gets screwed. After twisting the button, it's time to proceed with the next method if it does not work.

Once you get successful with this attempt of removing the jeans button with the pliers, you can replace it accordingly. On this note, there are multiple replacement methods that you can try out.

However, if you think removing the button with pliers cannot be accomplished, here is another alternative method that you can try out.

Method 2: How to Remove Jeans Button with Pliers & A Screwdriver

To complete the job using a screwdriver, you need to include pliers too. Use both of these tools simultaneously in order to achieve a successful result. Follow the steps mentioned below.

Step 1: Place The Jeans on a Flat Surface

Once you take the jeans, place them on a flat surface. It is preferable to keep the outfit on a hard flat surface. Additionally, ensure performing the task in a spacious area.

Step 2: Use the Pliers

The purpose of using the pliers is to get a grip on both sides. For the first plier, use it for gripping the front side. And for the second plier, grip the other side on the jean's underside. Always make sure that you have your required face protection while performing the task.

Step 3: Push The Rivet with a Screwdriver

After holding the button with pliers, you need to push the rivet side with the help of a screwdriver. For doing so, implement a leveraging motion to loosen the rivet. This move will help in pulling the sides apart!

That's it! By performing the aforementioned steps, you'd be able to remove your jeans button without breaking it. But if you think you need a cutter for it, perform the steps mentioned in the third method.

Method 3: How to Remove Jeans Button with a Cutter

Removing the jeans button with the help of a cutter might sound the most straightforward. But when it comes to removing it without any breakage, the same job becomes so intimidating. However, you can stay worry-free by considering the below-offered method.

To ensure that the button doesn't get damaged, ensure performing these steps minutely. Let's take a glimpse of this process carefully. For this, you'd require either combination pliers or wire cutters! So, read on.

Step 1: Placement of The Jeans

In the first step, you'd require placing the jeans in such a way that the back rivet and internal section faces you directly. For this reason, make sure that the surface you choose is flat and wide.

One Quick Note:

Do not perform the task in a jam-packed area of your room. Ensure that it's clean and out of children's or kids' reach.

Step 2: Push A Flat-Head Screwdriver at the Rivet's Back

You need to wriggle your screwdriver to pry apart the base of the rivet from the top section on another side of the layer. Now, you have to place the center of the top section of rivet in the jaws of the lineman's pliers. Upon then, pull the two sections apart of that rivet.

Step 3: Slide a Plier's Cutting Edge On The Wire Cutter

After performing the second step, it's time to perform the third step. In this step, you will have to slide the cutting edge of the plier on the wire cutter. Ensure that the wire cutter performs well. As a matter of fact, you may also use pliers. But that is, of course, if you find wire cutters to be difficult!

Remember that the pliers comprise a grip area at its nose. And below this area, there's an indented cutting edge. Wire cutters might be similar in building, although it's not an exaggeration to state that they lack gripping. Thus, you need to perform the next step carefully.

Step 4: Squeeze Pliers Together

In the fourth step, you will have to squeeze pliers together. In fact, this is the most important job to perform. After all, it makes the opposite cutting edge slide under that rivet button.

In addition, you require putting some force in order to cut through the part of the button. Make it carefully as it may have a tendency to break the button.

Step 5: Remove Two Sides of The Button

If you follow the steps precisely, you'd have no problem achieving the results. As soon as you see that the button gets removed, ensure that you remove both of its sides.

One Quick Note:

As you need to use some force, be extra careful to take extra precautions. Again, take eye protection because when the stud gets off, it may end up flying off in any direction! Always stay out of pets or children while performing the task.

So, that's it. Now that you have learned the last method, you may try your hands on any of these. If you think it's time to replace your button after removing it, you can refer to the steps elucidated below. Let's explore them through the below-mentioned narrative!

How To Replace A Button On Your Jeans?

Now that you know how to remove your bottom wear button, you might also want to replace it with a new one. That is why we have listed below a process to replace the button of your pair of jeans. Let us browse through it.

Requirements:

Button
Tack
Hammer

Step 1: First, you have to put your jeans on a table with front-side up .

Step 2: Now, unzip the chain

Step 3: Open the bottom wear at the waistband to see the hole where you have to place the button.

Step 4: Now, hold the waistband at the hole and turn it over to see the hole.

Step 5: Put the tack from behind and the button on top of it.

Step 6: Put a flat work surface, like a piece of wood, a cutting board, beneath the tack, and between the front and back of the jeans.

Step 7: Take a hammer to pound onto the tack. It would be best to take a small hammer or mallet to prevent the button from breaking.

Step 8: You can use a pair of pliers to hold the button in place.

Step 9: Now, you can test the button by buttoning it and ensuring it is set and secure.

How to Replace A Button Of Your Jeans With A Regular Button With Holes

Not just a metallic rivet-style button, but you can also replace it with a regular type. This type of button is appropriate for jeans that do not have a standard-sized buttonhole. However, you have to make a thread shank to work on thick materials such as a pair of jeans.

Now, you might be wondering what a thread shank is? It is a threaded stem that will enable the button to stand up from the jeans' waistband like a mushroom. Doing it is necessary to allow ample space for the other side of the buttonhole waistband so that the button and fabric perfectly fit.

Requirements:

Regular button with holes
Needle
Thread
Toothpick or skewer or large tapestry needle (an item that has one pointed end)

Step 1: First, you have to choose a button that easily fits through the buttonhole. It would be best to test the fitting by pushing the button through the hole.

Step 2: We are illustrating the method with a large toothpick. It should be as thick as one side of the buttonhole.

Step 3: Now, you have to thread the needle with thread that is of a quadrupled length. It would be best to use a thread that matches the color of your pair of jeans.

Step 4: Cut a thread as long as your wingspan, which is the length from one fingertip to the other. Then, fold it in half.

Step 5: Now, put the thread through the needle's eye and even it up to have the two cut ends a little longer than the fold.

Step 6: Make one small stitch on the waistband's back.

Step 7: You need to run the needle through the thread loop.

Step 8: You have to pull the thread tightly. Then trim the thread's two cut ends close to the material.

Step 9: Run the needle through to the waistband's outer side and through one of the holes in the button.

Step 10: You have to place the toothpick above the button and between the holes.

Step 11: Put the needle above the toothpick and stitch down through the waistband.

Step 12: Now, pull the toothpick out and run the needle between the button and waistband.

Step 13: Pull the button away from the waistband and wind the thread four times around the thread, holding the button. Cut the string after securing it. And you are done.

Can You Reuse A Jeans Button?

Yes, you can reuse the button if it has come out unharmed. You will find several types of it, and they are not supposed to come out quickly. However, if it has, and it looks like a new unbroken button which you had brought to replace it, then you can go ahead and try only the front part. However, you have to take a new tack for the inner part.

Why Do Jeans Have Rivets?

Why Do Jeans Have Rivets

Jeans mostly use rivets styled buttons to secure the waistband and prevent the pants from falling off. These are designed to deal with a lot of pressure, and movement, yet remain stable and secure. It helps the fabric stay together and helps the jeans to last longer. These buttons do not come off quickly and have to be applied a lot of force with appropriate tools to take them apart.